Collection: FRR 60 Minute

The PS60 is a sliding fire door. The PS60 is activated by a counter weight system connected to either a fusible link or electromagnetic lock system.

updated : 23/7/2024

The PS60 sliding fire door set is used where a large opening in a fire separation (up to 10m2) is required to be closed off in the event of a fire and/or in daily use.

The slider may be concealed behind an appropriate cavity wall. Automatic opening and closing is not currently available for Sliding Fire Doors.

The PS60 is a sliding fire door set. The door leaf can be faced in plywood or steel sheet, and is capped with steel channel to 4 edges and hung from a sliding track system.

A counterweight system, released by a fusible link or electromagnetic hold open devices that are linked to a fire detection system, closes the door leaf in the event of a fire.

For higher fire ratings and larger sized doors refer to the PS240 slider.

PS60 is not available as a smoke control door set.

The thickness of the PS60 door leaf is 65mm with an approximate leaf weight of at least 31kg/m2

Notes:

The PS60 is not available as a ‘pair’ door set.

The maximum area per sliding door leaf is 10.5m2.

The Best PR60 is a side hung door set. The door set configuration may be single leaf or pair, finished with a variety of facings and hung in a steel or timber frame.

updated : 20/4/2024

The thickness of the PR60 door leaf is 48mm with an approximate leaf weight of 27kg/m

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

The ‘sm’ above denotes that the door is available as a smoke control door set.

Meeting stiles for doors installed into Korok walls are restricted to J-Section or Bullnose.

Timber framed doorsets in Korok walls have limited installation options. Please see the installation section for details.

Timber jambs are limited for doors installed into Speedwall and James Hardie walls

Insulation ratings must be notified at time of pricing for steel frames. Maximum insulation ratings shown. Some wall applications will have a maximum 30 minute insulation rating.

Door sets with leafs larger than 2700 x 1200 are not intended for frequent use, we recommend they be typically either held open or closed with compliant hardware in normal operation.

JHETGJ60 is the only approved James Hardie fire rated wall system.

Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.

The PD60 is a pivoted double action (double swing) fire door set that is hung in a steel frame. This door set offers a wide variety of leaf facings and glazing options.

updated : 20/4/2024

Best Double Action door sets are 180° pivoting doors. The door set configuration may be single leaf or pair, finished with a variety of facings and pivoted in a steel frame.

The thickness of the PD60 door leaf is 48mm with an approximate leaf weight of 27kg/m2

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

The Best Double Action fire door set can be supplied as a smoke control door as defined in the NZBC Acceptable Solutions.

Bottom seals are not available with this door type.

Insulation ratings must be notified at time of pricing for steel frames.

The PC60P fire door utilizes insulated glazing to allow large glazed areas either in the door leaf as a vision panel or as an attached sidelight. 

This product is now Obsolete : refer PR60

The Best PC60P door set is a door & glazing system with insulating glass which allows large sized glazing and timber detailing. The system includes a glazed single or pair hinged door hung in a timber or steel frame, with adjacent non-opening (fixed) sidelights. The glazing is also available as separate fire windows (See the FW60P datasheet).

The system has been approved using Pyrobel 16 glass.

The thickness of the PC60P door leaf is 50mm with an approximate leaf weight of 30kg/m2

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

The ‘sm’ above denotes that the door is available as a smoke control door set.

The PC60 fire door set is suitable for interior and exterior use and is available in timber or steel frames. This door set offers the largest range of leaf facings, meeting stiles and hardware options within our range of 60 minute fire protection doors.

The PA60 fire door set has a limited size range and is suitable for interior use only. It is a more economic and limited version of the PR60 fire door set. The PA60 is available in timber or steel frame with a variety of leaf facing and hardware options.

updated : 25/4/2024

The construction of the PA60 has a solid core and requires no metal fixing plates or channel in the door leaf. It is not suitable for exposed exterior use.

Timber-framed smoke control doors include a seal in the frame.

The thickness of the PA60 door leaf is 48mm with an approximate leaf weight of 24kg/m2

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

The ‘sm’ above denotes that the door is available as a smoke control door set.

The maximum area per door leaf is 2.468m2

Insulation ratings must be notified at time of pricing for steel frames.